1. Understanding "Allow LAN" in the Mihomo Era
In the modern networking landscape, users often find themselves in situations where only one device—typically a powerful PC or a dedicated server—has a high-quality proxy configured. Whether you are using Clash Verge Rev (the community-driven successor to the original Clash Verge) or other Mihomo-based cores, the Allow LAN feature is your gateway to network-wide freedom.
By enabling this feature, your computer acts as a local proxy server. Any device connected to the same Wi-Fi or Ethernet network can "borrow" your PC's connection to bypass regional restrictions, access global developer resources, or speed up game downloads on consoles like the Nintendo Switch or PlayStation 5. This guide specifically focuses on the 2026 release of Clash Verge Rev, ensuring you are using the most up-to-date interface and logic.
2. Prerequisites for Proxy Sharing
Before we dive into the software settings, ensure your environment meets these three basic criteria:
- Same Network: The "Host" (your PC running Clash) and the "Client" (your phone or console) must be on the same router or subnet.
- Stable IP: It is highly recommended to set a static local IP for your PC (e.g.,
192.168.1.100) so the settings don't break when the router reboots. - Clash Status: Ensure Clash Verge Rev is running and your proxy nodes are working correctly on the PC first.
3. Step-by-Step: Enabling Allow LAN in Clash Verge Rev
Follow these steps to activate the sharing capability within the Clash Verge Rev interface:
- Open Clash Verge Rev and navigate to the Settings tab on the left sidebar.
- Look for the Clash Core or General section. You will see a toggle labeled Allow LAN.
- Switch the toggle to ON.
- Check the Port setting. By default, Clash Verge Rev often uses
7897or7890. Make a note of this number. - (Optional but Recommended) If you see an option for Authentication, leave it blank for home use to simplify console setup, or set a username/password for public networks.
8888 if needed.
4. Crucial: Configuring the Windows/macOS Firewall
This is where most users fail. Even if Clash says "Allow LAN is ON," your operating system's firewall will likely block incoming connections from other devices for security reasons.
Windows Firewall Setup
Go to Control Panel > System and Security > Windows Defender Firewall > Allow an app or feature through Windows Defender Firewall. Click "Change settings" and find clash-verge.exe or the Mihomo core binary. Ensure both Private and Public are checked.
macOS Firewall Setup
Go to System Settings > Network > Firewall. Click "Options" and ensure that Clash Verge is allowed to receive incoming connections.
5. Finding Your Host PC's Local IP Address
To connect your phone or Switch, you need to know the PC's address.
- Windows: Open CMD and type
ipconfig. Look for "IPv4 Address" under your active connection (usually starts with192.168.x.x). - macOS: Open Terminal and type
ipconfig getifaddr en0(for Wi-Fi) or check Network Settings.
6. Configuring Client Devices (Phone & Consoles)
Now that the host is ready, configure your target device:
For iOS/Android
Go to Wi-Fi settings, tap your current network, find HTTP Proxy, change it to Manual. Enter the PC's IP (e.g., 192.168.1.100) and the Port (e.g., 7897).
For Nintendo Switch
Go to System Settings > Internet > Internet Settings. Select your Wi-Fi, Change Settings, and set Proxy Settings to On. Enter the IP and Port. This is excellent for speeding up eShop downloads or reducing latency in online matches.
7. Common Troubleshooting Scenarios
| Issue | Possible Cause | Solution |
|---|---|---|
| Connection Timed Out | Firewall blocking port | Add Clash to Firewall whitelist |
| No Internet on Client | DNS Mismatch | Enable "System DNS" in Clash Verge Rev |
| IP Changed | DHCP Lease expired | Assign a Static IP to your PC |
8. Advanced: TUN Mode vs. Allow LAN
While Allow LAN works at the application level (HTTP/SOCKS), some games or system services ignore proxy settings. In such cases, you might consider TUN Mode. However, sharing a TUN interface over a LAN requires complex routing table modifications or a "Virtual Router" setup. For 95% of users, the Allow LAN method described here is the most stable and easiest to maintain.
9. Why Clash Verge Rev is the Superior Choice
Compared to older tools or basic VPNs, Clash Verge Rev offers a far more granular control over your network. While standard VPNs often lack a simple "Share to LAN" toggle or require root/jailbreak on mobile to share, Clash handles this natively through the Mihomo core. It allows you to maintain high-speed internal network transfers (like NAS access) while only routing specific external traffic through the proxy.
If you are looking for a reliable, open-source way to manage your global network connectivity across all your home devices, head over to our download page to get the latest version of Clash Verge Rev →
Ready to get started?
Download the latest Clash Verge Rev for Windows, macOS, or Linux and take full control of your local network proxy today.